Summary: Applies fiberglass and resin to gel coated hull and/or deck molds by performing the following duties.

Essential Duties and Responsibilities

• Move parts into position into the Lamination Department.
• Prep parts in accordance with Malibu standards.
• Select appropriate fiberglass material according to part model. Roll out laminate eliminating air bubbles using specific hand tools, rollers, etc.
• Spray chopped fiberglass, resin and catalyst on mold, using pneumatic spray gun with chopper attachment.
• Trim excess material from mold using cutting tool.
• Cut fiberglass mat from spool as needed using scissors.
• Use mill gage to accurately determine material thickness.
• Other duties may be assigned.

Qualifications To perform this job successfully, on individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Ability to pass Pulmonary Function Testing (PFT)

Education and/or Experience

High School diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.

Language Skills

Ability to read and comprehend simple instructions.

Mathematical Skills

General math skills required.

Reasoning Ability

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving variables in procedures and/or environment.

Physical Demands

Use the drop down boxes to select the appropriate response to each area.

Continuous/C = 67-100%, Frequent/F = 33-66%, Occasional/O = 33%, None/N

• Sits 0 hours
• Stands 10 hours
• Walks 2 hours
• Drives 0 hours

Employee Lifts and/or Carries: type amount of weight in each area

Maximum: 50(lbs) Frequently: 10-20 (lbs) Occasionally: 50 (lbs)

Employee uses Hands for repetitive activities:

• Simple Grasping: Right, Constant Left, Constant
• Pushing/Pulling: Right, Occasional Left, Occasional
• Fine Manipulation: Right, Constant Left, Constant

Employee uses Feet for repetitive activities:

• Right: Occasional Left: Occasional

Employee is required to perform these activities:

• Bending At Waist: Constant
• Squatting: Occasional
• Climbing Ladders, Stairs: Occasional
• Kneeling On Ground: Occasional
• Reaching Above Shoulder: Frequent

Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job (ie; heat/cold, dust/dampness, height; chemical; noise) PPE requirements are included. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Safety glasses required at all times

Chemical resistant gloves required

Other PPE may be required depending upon workstation

Typical 10 hour work days, frequent overtime required.

Competencies

To perform the job successfully, an individual should demonstrate the following competencies:

Teamwork: Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Supports everyone's efforts to succeed.

Motivation: Measures self against standard of excellence.

Quality: Demonstrates accuracy and thoroughness; Applies feedback to improve performance; Monitors own work to ensure quality.

Attendance/Punctuality: Is consistently at work and on time.

Dependability: Takes responsibility for own actions.

Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and/or Experience High School diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.

Language Skills

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

Mathematical Skills

Ability to add, subtracts, multiply, and divides in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

Reasoning Ability

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

Other Qualifications None

Physical Demands

Regularly required to work at, lifting parts and pieces up to 50 lbs., traveling up and down stairs, sitting, squatting and bending in various awkward positions for certain lengths of time - including working overhead, traveling in and out of work areas, walking and being on your feet for a majority of the work day. Physical exertion is required.

Use the drop down boxes to select the appropriate response to each area.

Continuous/C = 67-100%, Frequent/F = 33-66%, Occasional/O = 33%, None/N

• Sits 1 hours
• Stands 8 hours
• Walks 1 hours
• Drives 0 hours

Employee Lifts and/or Carries

Maximum 50 (lbs) Frequently 25 (lbs) Occasionally 40 (lbs)

Employee uses Hands for repetitive activities:

• Simple Grasping - Right Frequent Left Frequent
• Pushing/Pulling - Right Frequent Left Frequent
• Fine Manipulation - Right Occasional Left Occasional

Employee uses Feet for repetitive activities:

• Right - None b. Left - None

Employee is required to perform these activities:

• Bending-At-Waist Frequent
• Squatting Frequent
• Climbing - Ladders, Stairs Occasional
• Kneeling - On Ground Occasional
• Reaching - Above Shoulder Occasional

Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job (ie; heat/cold, dust/dampness, height; chemical; noise) PPE requirements are included. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Typical 10 hour work days, frequent overtime required.

PPE Requirements Safety glasses; cut resistant glove when using carpet knife

Competencies

To perform the job successfully, an individual should demonstrate the following competencies:

Teamwork: Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Supports everyone's efforts to succeed.

Motivation: Measures self against standard of excellence.

Quality: Demonstrates accuracy and thoroughness; Applies feedback to improve performance; Monitors own work to ensure quality.

Attendance/Punctuality: Is consistently at work and on time.

Dependability: Takes responsibility for own actions.